Switch Planet IGS-20160HPT

Planet IGS-20160HPT Zarządzalny, przemysłowy switch 16-portów 10/100/1000T 802.3at PoE + 2-porty 10/100/1000T + 2-porty 100/1000X SFP (-40~75 stopni C)



Environmentally Hardened DesignPLANET Industrial 16-Port Gigabit 802.3at PoE+ Switch, IGS-20160HPT, is equipped with rugged IP30 metal case for stable operation in heavy Industrial demanding environments. With IP30 industrial case protection, the IGS-20160HPT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. Being able to operate under wide temperature range from -40 to 75 degrees C, the IGS-20160HPT can be placed in almost any difficult environment. The IGS-20160HPT also allows either DIN rail or wall mounting for efficient use of cabinet space.



 

Klluczowe cechy:

Physical Port

16 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector

2 10/100/1000BASE-T Gigabit Ethernet RJ45 ports

2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection

One RJ45 console interface for basic management and setup

Industrial Case & Installation

IP30 aluminum case protection

DIN rail and wall-mount design

48~56V DC, redundant power with polarity reverse protect function

Supports 6000V DC Ethernet ESD protection

-40 to 75 degrees C operating temperature

Digital Input & Digital Output

2 Digital Input (DI)

2 Digital Output (DO)

Integrate sensors into auto alarm system

Transfer alarm to IP network via email and SNMP trap

Layer 2 Features

Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)

High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth

Storm Control support



- Broadcast/Multicast/Unicast

Supports VLAN



- IEEE 802.1Q tagged VLAN- Up to 255 VLANs groups, out of 4094 VLAN IDs- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)- Private VLAN Edge (PVE)- Protocol-based VLAN- MAC-based VLAN- Voice VLAN

Supports Spanning Tree Protocol



- IEEE 802.1D Spanning Tree Protocol (STP)- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN- BPDU Guard

Supports Link Aggregation



- 802.3ad Link Aggregation Control Protocol (LACP)- Cisco ether-channel (static trunk)- Maximum 10 trunk groups with 4 ports per trunk group- Up to 8Gbps bandwidth (duplex mode)

Provides port mirror (1-to-1)

Port mirroring to monitor the incoming or outgoing traffic on a particular port

Loop protection to avoid broadcast loops

Supports ERPS (Ethernet Ring Protection Switching)

Layer 3 IP Routing Features

Supports maximum 32 software static routes and route summarization

Quality of Service

Ingress Shaper and Egress Rate Limit per port bandwidth control

8 priority queues on all switch ports

Traffic classification



- IEEE 802.1p CoS- IP TOS/DSCP/IP precedence- IP TCP/UDP port number- Typical network application

Strict priority and Weighted Round Robin (WRR) CoS policies

Supports QoS and In/Out bandwidth control on each port

Traffic-policing policies on the switch port

DSCP remarking

Multicast

Supports IGMP snooping v1, v2 and v3

Supports MLD snooping v1 and v2

Querier mode support

IGMP snooping port filtering

MLD snooping port filtering

MVR (Multicast VLAN Registration)

Security

IEEE 802.1x Port-based/MAC-based network access authentication

Built-in RADIUS client to cooperate with the RADIUS servers

TACACS+ login users access authentication

RADIUS/TACACS+ users access authentication

IP-based Access Control List (ACL)

MAC-based Access Control List

Source MAC/IP address binding

DHCP snooping to filter distrusted DHCP messages

Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding

IP Source Guard prevents IP spoofing attacks

IP address access management to prevent unauthorized intruder

Management

Switch Management Interfaces



- Console/Telnet Command Line Interface- Web switch management- SNMP v1 and v2c switch management- SSH/SSL and SNMP v3 secure access

Four RMON groups (history, statistics, alarms, and events)

IPv6 IP address/NTP/DNS management

Built-in Trivial File Transfer Protocol (TFTP) client

BOOTP and DHCP for IP address assignment

Firmware upload/download via HTTP/TFTP

DHCP Relay

DHCP Option 82

User Privilege levels control

Network Time Protocol (NTP)

Link Layer Discovery Protocol (LLDP)

SFP-DDM (Digital Diagnostic Monitor)

Cable diagnostic technology provides the mechanism to detect and report potential cabling issues

Reset button for system reboot or reset to factory default

PLANET Smart Discovery Utility for deployment management

















Redundant Ring, Fast Recovery for Surveillance SystemThe IGS-20160HPT supports redundant ring technology and features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced Redundant Ring technology, Spanning Tree Protocol (802.1w RSTP), and redundant power supply system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. The IGS-20160HPT also protects customer’s industrial network connectivity with switching recovery capability that is used for implementing fault tolerant ring and mesh network architectures. If the Industrial network was interrupted accidentally, the fault recovery times could be less than 50ms to quickly bring the network back to normal operation.

High Power PoE for Security and Public Service ApplicationsTo fulfill the demand of High Power PoE for network applications with Gigabit speed transmission under wide temperature, the IGS-20160HPT provides 16 10/100/1000Mbps ports featuring IEEE 802.3at Power over Ethernet Plus (PoE+) that combines up to 36-watt power output and data per port over one Cat.5E/6 Ethernet cable. With a total 320-watt PoE budget on the whole system, the IGS-20160HPT is designed specifically to satisfy the growing demand of higher power consuming network PDs (powered devices) such as PTZ (Pan, Tilt & Zoom)/Speed Dome network cameras, multi-channel (802.11a/b/g/n) wireless LAN access points and other PoE network devices by providing PoE power, doubling that of the current conventional 802.3af PoE.



Intelligent Alive Check for Powered DeviceThe IGS-20160HPT PoE Switch can be configured to monitor connected PD’s status in real time via ping action. Once the PD stops working and responding, the IGS-20160HPT will recycle the PoE port power and bring the PD back to work. It also greatly enhances the reliability in that the PoE port will reset the PD power, thus reducing administrator’s management burden.



PoE Schedule for Energy SavingUnder the trend of energy saving worldwide and contributing to environmental protection on the Earth, the IGS-20160HPT can effectively control the power supply besides its capability of giving high watts power. The built-in “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.



Digital Input and Digital Output for External AlarmThe IGS-20160HPT supports Digital Input and Digital Output on its front panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-20160HPT port shows link down, link up or power failure.



Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible ManagementTo help customers stay on top of their businesses, the IGS-20160HPT not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly secured, flexible management and simpler networking application.Robust Layer 2 FeaturesThe IGS-20160HPT can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-20160HPT provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-20160HPT allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 10 trunk groups with 4 ports per trunk group, and supports fail-over as well. 

Efficient ManagementFor efficient management, the IGS-20160HPT Managed Ethernet Switch is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, the IGS-20160HPT offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-20160HPT can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SNMP v3 connection which encrypts the packet content at each session.

Powerful SecurityThe IGS-20160HPT offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secured corporate networks with considerably less time and effort than before.

Flexibility and Extension SolutionThe two mini-GBIC slots built in the IGS-20160HPT support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.



Perfect Integration Solution for Outdoor IP PoE Camera and NVR SystemThe IGS-20160HPT provides 16 10/100/1000Mbps 802.3at PoE+ ports and can offer sufficient PoE power to 16 PoE IP cameras at the same time. In addition, with the 2 100/1000BASE-X SFP interfaces, the IGS-20160HPT can connect to core fiber switch and send video stream to NVR and monitoring center. Through the high-performance switch architecture, the IGS-20160HPT facilitates the recorded video files from the 16 PoE IP cameras to be saved in the NVR systems. Furthermore, the NVR systems can be controlled and monitored both in the local LAN and the remote site via Internet. The IGS-20160HPT undoubtedly brings an ideal secure surveillance system at a lower total cost.



Zastosowanie:

Industrial Area Department/Workgroup PoE SwitchProviding up to 16 PoE+, in-line power interfaces, the IGS-20160HPT can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 16 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-20160HPT makes the installation of IP cameras or wireless AP easier and more efficient.



High Power IP Surveillance and Wireless LAN Service in Public TransportationWith IEEE 802.3at Power over Ethernet Plus standard, the IGS-20160HPT can directly connect with any IEEE 802.3at end-nodes like PTZ (Pan, Tilt & Zoom) network cameras, PTZ speed dome cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points. Wireless LAN would be more efficient for the transportation station to provide high speed and wide area Internet services for travelers. With the PoE wireless LAN structure, the transportation authority gains benefits from less cost while providing better Internet services in wider areas for the travelers.

 

Przełącznik nie posiada zasilacza zewnętrznego. Zasilacz można znaleźć pod linkami: 120W  240W

 







Hardware Specifications

Copper Ports

18 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports

SFP/mini-GBIC Slots

2 1000BASE-SX/LX/BX SFP interfaces (Port-19 and Port-20)Compatible with 100BASE-FX SFP

PoE Injector Port

16 ports with 802.3at/af PoE injector function with Port-1 to Port-16

Console

1 x RJ45-to-RS232 serial port (115200, 8, N, 1)

Switch Architecture

Store-and-Forward

Switch Fabric

40Gbps/non-blocking

Throughput (packet per second)

29.7Mpps@ 64Bytes packet

Address Table

8K entries, automatic source address learning and aging

Shared Data Buffer

4Mbits

Flow Control

IEEE 802.3x pause frame for full-duplexBack pressure for half-duplex

Jumbo Frame

9Kbytes

Reset Button

5 sec: Factory default

ESD Protection

6KV DC

Enclosure

IP30 aluminum case

Installation

DIN rail kit and wall-mount kit

Connector

Removable 6-pin terminal block for power inputPin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2Removable 6-pin terminal block for DI/DO interfacePin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND

Alarm

One relay output for power failure. Alarm Relay current carry ability: 1A @ DC 24V

DI/DO

2 Digital Input (DI):Level 0: -24V~2.1V (±0.1V)Level 1: 2.1V~24V (±0.1V)Input Load to 24V DC, 10mA max.2 Digital Output (DO): Open collector to 24V DC, 100mA max.

LED Indicator

System:Power 1 (Green)Power 2 (Green)Fault Alarm (Green)Ring (Green)Ring Owner (Green)Per 10/100/1000T RJ45 PoE+ Ports: PoE-in-Use (Orange)LNK/ACT (Green)Per 10/100/1000T RJ45Ports: 1000 LNK/ACT (Orange)100 LNK/ACT (Green)Per SFP Interface:1000 LNK/ACT (Orange)100 LNK/ACT (Green)

Dimensions (W x D x H)

152 x 107x 84 mm

Weight

1533g

Power Requirements

Dual 48~56V DC (>51V DC for PoE+ output recommended)

Power Consumption

11.1 watts/37.87BTU (Power on without any connection)349 watts/119.08BTU (Full loading with PoE function)

Power Over Ethernet

PoE Standard

IEEE 802.3at Power over Ethernet Plus/PSE

PoE Power Supply Type

End-span

PoE Power Output

IEEE 802.3af Standard- Per port 48V~51V DC (depending on the power supply), max. 15.4 watts IEEE 802.3at Standard- Per port 51V~56V DC (depending on the power supply), max. 36 watts

Power Pin Assignment

1/2(+), 3/6(-)

PoE Power Budget

48V Power input- 240W maximum (depending on power input)56V Power input- Single power input: 260W maximum (depending on power input)- Dual power input: 320W maximum (depending on power input)

Max. number of Class 2 PDs

16

Max. number of Class 3 PDs

16

Max. number of Class 4 PDs

10

Layer 2 Function

Basic Management Interfaces

Console; Telnet; Web browser; SNMP v1, v2c

Secure Management Interfaces

SSH, SSL, SNMP v3

Port Configuration

Port disable/enableAuto-negotiation 10/100/1000Mbps full and half duplex mode selectionFlow control disable/enablePower saving mode control

Port Status

Display each port’s speed duplex mode, link status, flow control status,auto negotiation status, trunk status

Port Mirroring

TX/RX/both1 to 1 monitor

VLAN

802.1Q tagged based VLAN, up to 255 VLAN groupsQ-in-Q tunnelingPrivate VLAN Edge (PVE)MAC-based VLANProtocol-based VLANVoice VLANMVR (Multicast VLAN Registration)Up to 255 VLAN groups, out of 4094 VLAN IDs

Link Aggregation

IEEE 802.3ad LACP/static trunkSupports 10 trunk groups with 4 ports per trunk group

QoS

Traffic classification based, strict priority and WRR8-level priority for switching- Port number - 802.1p priority- 802.1Q VLAN tag- DSCP/TOS field in IP packet

IGMP Snooping

IGMP (v1/v2/V3) snooping, up to 255 multicast groupsIGMP querier mode support

MLD Snooping

MLD (v1/v2) snooping, up to 255 multicast groupsMLD querier mode support

Access Control List

IP-based ACL/MAC-based ACLUp to 123 entries

Bandwidth Control

Per port bandwidth controlIngress: 500Kb~1000MbpsEgress: 500Kb~1000Mbps

SNMP MIBs

RFC-1213 MIB-IIIF-MIBRFC-1493 Bridge MIBRFC-1643 Ethernet MIBRFC-2863 Interface MIBRFC-2665 Ether-Like MIBRFC-2819 RMON MIB (Group 1, 2, 3 and 9)RFC-2737 Entity MIBRFC-2618 RADIUS Client MIBRFC-2933 IGMP-STD-MIBRFC3411 SNMP-Frameworks-MIBIEEE 802.1X PAELLDPMAU-MIB

Layer 3 Function

IP Interfaces

Max. 8 VLAN interfaces

Routing Table

Max. 32 routing entries

Routing Protocols

IPv4 software static routingIPv6 software static routing

Standards Conformance

Regulatory Compliance

FCC Part 15 Class A, CE

Stability Testing

IEC60068-2-32 (free fall)IEC60068-2-27 (shock)IEC60068-2-6 (vibration)

Standards Compliance

IEEE 802.3 10BASE-TIEEE 802.3u 100BASE-TX/100BASE-FXIEEE 802.3z Gigabit SX/LXIEEE 802.3ab Gigabit 1000TIEEE 802.3x flow control and back pressureIEEE 802.3ad port trunk with LACPIEEE 802.1D Spanning Tree ProtocolIEEE 802.1w Rapid Spanning Tree ProtocolIEEE 802.1s Multiple Spanning Tree ProtocolIEEE 802.1p Class of ServiceIEEE 802.1Q VLAN taggingIEEE 802.1x Port Authentication Network ControlIEEE 802.1ab LLDPIEEE 802.3af Power over EthernetIEEE 802.3at Power over EthernetRFC 768 UDPRFC 793 TFTPRFC 791 IPRFC 792 ICMPRFC 2068 HTTPRFC 1112 IGMP v1RFC 2236 IGMP v2

Environment

Operating Temperature

-40 ~ 75 degrees C

Storage Temperature

-40 ~ 85 degrees C

Humidity

5 ~ 95% (non-condensing)







 

Ordering Information

IGS-20160HPT

Industrial 16-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch (-40~75 degrees C) (PL)